Collection

Natural Stone Slabs

One block per page. Each one different. That is the entire sales pitch.

Some Frequently Asked Questions About Natural Stone Slabs

How does a marble slab go from mountain to kitchen?

It starts at the quarry face, where a raw block — typically 2.5m × 1.5m × 1.5m, weighing 15–20 tonnes — is cut free using diamond wire saws. The block is transported to a processing plant where a gang saw (a frame holding dozens of parallel diamond blades) slices it into slabs, usually 20mm or 30mm thick. Each slab is then polished or honed on a calibrating line, inspected for flaws, and bundled in sequence so that consecutive slabs from the same block can be bookmatched. The entire journey from quarry extraction to finished slab takes 4–8 weeks depending on the stone and the quarry's location.

What is bookmatching, and why does it matter?

When a gang saw slices through a block, each consecutive slab is a near-mirror image of the one before it — like opening a book. Laying two consecutive slabs side by side with one flipped creates a symmetrical veining pattern across the pair. This is bookmatching. It transforms a kitchen island, a feature wall, or a bathroom surround into a single composed image rather than a random arrangement of stone. Bookmatching only works with sequential slabs from the same block, which is why slab selection at the yard — seeing the actual stone before committing — matters far more than choosing from a sample chip.

What slab thicknesses are available, and which should I choose?

Standard thicknesses are 20mm and 30mm. For worktops and kitchen islands, 20mm is the most common — it is lighter, easier to handle, and structurally sufficient for any countertop span when properly supported. 30mm is used where a thicker edge profile is desired for visual weight, or for unsupported spans exceeding 600mm (such as cantilevered breakfast bars). Feature walls and cladding can use 20mm or even thinner veneered panels depending on the application. We advise on thickness based on the specific project — there is no universal right answer.

How do I choose the right slab for my project?

Start with the application (worktop, floor, wall, fireplace), then consider the room's lighting and existing palette. Veining direction matters — vertical veining on a feature wall creates height, horizontal veining creates width. For worktops, think about the edge profile and whether you want bookmatched or running pattern. We recommend selecting from actual slab photographs or visiting a yard to see the stone in person, because every slab is unique. Send us a quote request describing your project and we will shortlist slabs, send photographs, and walk you through the options before you commit.

What is the difference between polished, honed, and brushed finishes?

Polished is a high-gloss mirror finish that maximises colour depth and vein contrast — the surface reflects light directly. Honed is a smooth matte finish with no reflection — it softens the veining slightly and makes surface etching virtually invisible, which is why it is the most practical choice for kitchen worktops. Brushed (or leathered) has a textured, slightly rough surface that adds a tactile dimension and hides wear exceptionally well — popular for rustic or industrial interiors. All three finishes are applied at the processing stage, not after installation. The same slab can look like three different stones depending on the finish chosen.